A Comprehensive Guide to Changing the Water Filter on a Kenmore Refrigerator Model 253
If you own a Kenmore refrigerator model 253, it’s essential to know how to change the water filter to maintain optimal water quality and appliance performance. In this refrigerator repair blog, we’ll walk you through the entire process of changing the water filter on your Kenmore refrigerator model 253. From locating the filter to installation, you’ll find everything you need to know to complete the task with ease. So, let’s dive in and explore how to change the water filter on a Kenmore refrigerator model 253.
Locating the Water Filter in Your Kenmore Refrigerator Model 253
The water filter in your Kenmore refrigerator model 253 is typically located in one of two places:
- In the upper right-hand corner of the refrigerator compartment, behind a drop-down cover
- In the bottom grille, beneath the refrigerator doors
- Check your owner’s manual for the specific location of the water filter in your particular model.
Preparing for the Water Filter Replacement
Before you begin changing the water filter on your Kenmore refrigerator model 253, gather the necessary tools and materials:
- A new, compatible water filter (check your owner’s manual or the Kenmore website for the correct filter model)
- A towel or container to catch any water spills during the process
Matching Kenmore Refrigerator Models and Water Filter Models
Kenmore Refrigerator Model and Compatible Water Filter Model
253.7034341D 46-9999 (ADQ73613402)
253.7034341E 46-9999 (ADQ73613402)
253.7034341F 46-9999 (ADQ73613402)
253.7041241D 46-9999 (ADQ73613402)
253.7041241E 46-9999 (ADQ73613402)
253.7041241F 46-9999 (ADQ73613402)
253.7034241D 46-9690 (ADQ36006101)
253.7034241E 46-9690 (ADQ36006101)
253.7034241F 46-9690 (ADQ36006101)
253.7040241D 46-9690 (ADQ36006101)
253.7040241E 46-9690 (ADQ36006101)
253.7040241F 46-9690 (ADQ36006101)
253.57119600 46-9930 (EDR1RXD1)
253.57119601 46-9930 (EDR1RXD1)
Please note that this table provides a general overview of compatible water filter models for some popular Kenmore refrigerator models. It is crucial to consult your refrigerator’s user manual or the Kenmore website for the most accurate and up-to-date information on water filter compatibility. Always use the recommended water filter model to ensure optimal performance and avoid potential issues.
Step-by-Step Guide to Changing the Water Filter on a Kenmore Refrigerator Model 253
Step 1: Turn off the refrigerator’s water supply
Before removing the old filter, shut off the water supply valve, typically found behind the refrigerator or under the kitchen sink.
Step 2: Remove the old water filter
If the filter is located in the upper right-hand corner, press the release button on the drop-down cover and pull the filter straight out. If the filter is located in the bottom grille, turn the filter counterclockwise to release it and pull it out.
Step 3: Drain any residual water
Drain any water remaining in the old filter into a towel or container to prevent spills.
Step 4: Prepare the new water filter
Remove the protective cover from the new filter’s O-rings. If needed, fill the filter with tap water to help reduce air bubbles in the system.
Step 5: Install the new water filter
If the filter is located in the upper right-hand corner, slide the new filter into the housing and close the cover. If the filter is located in the bottom grille, push the filter into the housing and turn it clockwise until it locks into place.
Step 6: Turn on the water supply
Open the water supply valve and check for any leaks around the filter housing.
Step 7: Flush the new water filter
Run the water dispenser for approximately 3-4 minutes to flush the new filter and remove any air from the system. Dispose of the first batch of ice produced after the filter change, as it may contain impurities.
Changing the water filter on your Kenmore refrigerator model 253 is a simple yet essential maintenance task that ensures clean, safe drinking water and optimal appliance performance. With this comprehensive refrigerator repair blog, you now have the knowledge and confidence to change the water filter on your Kenmore refrigerator model 253. Remember to replace the filter every six months or as recommended by the manufacturer, and always use a compatible water filter model to avoid potential issues.
We will arrive on time and carry out repairs of any complexity
Santa Barbara Appliance Repair at (805) 456-6512 has been a dependable source for many families living in Santa Barbara and neighboring cities for the last decade. Many residents appreciate the work we did for them and called us again or referred us to their family members and friends. Having healthy business relationships with clients and building our client network is crucial to our business. Santa Barbara Appliance Repair serves households and businesses by fixing problems and applying experience and knowledge to the following appliance brands: Wolf, Viking, Thermador, JennAir, Miele, Fisher & Paykel, Samsung, Bosch, LG, GE, Kenmore, Whirlpool, Asko, Kenmore, DCS and many other well-known brands. If you do not find your appliance brand name, do not worry. Call us at (805) 456-6512 and our customer service representatives will dispatch the right technician to take care of the problem for you. Santa Barbara Appliance Repair services include and are not limited to repair, maintenance and new appliance installation for many households and commercial brands as well.